A bathroom is perhaps the most unhygienic place in a home that quickly accumulates dirt and often stinks. You should clean the bathroom from time to time, so it looks immaculate and smells fresh all the time.
More importantly, a clean bathroom
protects the kids from infections, allergies and illness. Just make sure you do not use store-bought cleaners to clean the bathroom.
Most of these products contain harmful chemicals that pollute the indoor air. You should only use eco-friendly products. The green cleaning approach has become popular, so many professional companies that offer reliable end of lease cleaning Canberra, started using chemical-free products. You can also perform the task by using basic household ingredients like vinegar, baking soda, hydrogen peroxide, lemon, etc.
Eco-friendly products are effective against dirt, limescale, soap scum, etc. Moreover, they are entire safely, easily available and way cheaper than the costly store-bought cleaners. If you want to clean your bathroom naturally and perfectly, you need the knowledge of the correct methods and a little elbow grease.
Read on to know more about how to green clean your bathroom without toxic chemicals.
Toilet
If you want to clean your toilet, avoid using store-bought cleaners. They contain harmful chemicals like Hydrochloric acid, Cetrimonium chloride, Sodium hydroxide and many more. Instead of opting for such products,
use vinegar for household cleaning and other natural ingredients. To clean your toilet, sprinkle baking soda inside the toilet bowl and wait for a few minutes. Then spray vinegar inside the bowl and close the cover.
Wait for a few more minutes, and then scrub the bowl with a toilet brush. Any stubborn dirt or stains inside the toilet will get softened by the vinegar. That will make it easier for you to clean the surface. Finally, flush the toilet.
Sink and Faucets
Your sink and faucets accumulate soap scum, dirt and hard water stains that make them look dull. To clean a slightly dirty bathroom sink, use an all-purpose cleaner. If you require a bit stronger cleaner, use a distilled white vinegar or mild dish detergent mixed with water to cut through the dirt.
Faucets collect a maximum amount of dirt around the edges where the faucet and sink meet. Use the combination of dish soap and plain water to remove dirt from the edges with the help of an old toothbrush. Finally, wipe the faucet dry using a clean cloth.
Bathtub
The surface of a dirty and stains bathtub looks bad and becomes slippery, leading to an accident. Therefore, you need to clean it perfectly. To begin with, pour a bucket of hot water all over the bathtub and then sprinkle baking soda on the surface evenly.
Again fill the bucket half with hot water and add dish soap (two tablespoons). Soak a sponge into the bucket, and scrub the entire surface perfectly.
Finally, rinse the surface. If you want to avoid the hassles of scrubbing the bathtub or want to deep clean your bathroom at the end of the lease period, hire experienced cleaners who offer
end of lease cleaning in Canberra.
Shower Glass and Mirror
The shower glass and mirror quickly collect hard water stains and soap scum. To clean such surfaces without toxic chemicals, apply some dishwashing liquid on a brush or a coarse cloth and scrub the surface using some water.
Then rinse it properly. You can also use a combination of baking soda and vinegar. You can also scrub the surface with baking soda, but do not wash it immediately. After scrubbing, spray vinegar over the screen, then wash with warm water.
Showerhead
To remove limescale from the showerhead, first, remove it from the hose. Then put the showerhead in a plastic bag and fill it with white vinegar. Allow it to get saturated in the vinegar for at least one hour, and then take it out.
Use an old toothbrush to remove the remaining limescale, particularly from the nozzle. Finally, rinse properly and polish it using a soft cloth. If you book a professional end of lease cleaning company in Canberra, you will see their professionals follow the same methods to clean showerheads.
Tiles and Grout Lines
If you want to clean your dirty bathroom tiles, prepare a mixture using liquid dish soap, baking soda and warm water in a bowl. Then dip a sponge in the solution and scrub all the tiles one by one. It is one of the best
tips for cleaning ceramic tile floors.
To remove the stubborn dirt from the grout lines, make a paste using Hydrogen peroxide and baking soda. Apply it to the grout lines and scrub with an old toothbrush. Finally, rinse the surface properly and wipe.
Drain
A clogged drain can turn your clean bathroom into a complete mess. So make sure that you clean the drain every now and then. Instead of using chemically loaded drain cleaners, opt for a chemical-free option.
Pour 1/2 cup of baking soda into the drain, followed by 1/2 cup vinegar. Wait for some time so that the combination can break down the gunk. Finally, pour a pot of boiling water into the drain.
The Bottom Line
Bathroom cleaning is essential to make the place look good, smell fresh, keep diseases at bay, and prevent accidents. However, it is also crucial that you follow the correct approach.
If you are concerned about the
hygiene of your bathroom, clean it thoroughly by following the eco-friendly ways mentioned above. To clean a bathroom of a rental property at the end of the lease period, contact experts who offer the best end of lease cleaning in Canberra.
