How To Get Rid Of Mould On Ceiling?

How To Get Rid Of Mould On Ceiling?

By : Angelina
Nothing can be more annoying than removing mould and mildew from a house. The most difficult part is to tackling the mouldy ceiling. This affects a house’s aesthetic value and leads to various health problems. Mould stains on ceiling/wall junctions occur due to poor ventilation or missing insulation. This creates a cold spot where the ceiling meets the exterior walls.

The humidity and moisture attract grime, germs and dirt- which are the primary causes of mould infestation. It is good to try effective products and proper methods to remove mould on ceilings.

It is also important to repair the water leakage before treating these black spores. For a thorough bond cleaning Canberra, book the most experienced company that follows set cleaning standards to help you pass the rental inspection. However, they won’t clean mouldy surfaces. For that, you need to check the inclusions and exclusions.

Here is a complete guide to tackling mould on the ceiling using cleaning products that are safe for the environment and human well-being:

1. Stock Up on All The Necessary Tools

It is good to have all the necessary cleaning supplies before getting into the process. Make a list of tools you will need and treat mouldy ceilings like a pro:

  • Protective face mask
  • Gloves
  • Eyewear
  • Soft-Bristled Brush
  • Step Ladder: you need a ladder so that you can easily reach the surface for detail cleaning
  • Dishwashing Liquid : use a mild product
  • Sponge
  • Microfiber cloths
  • Spray Bottle

Do not use traditional mould removers because they contain ammonia, bleach and other harmful chemicals. Instead, use natural cleaners, such as vinegar, hydrogen peroxide, baking soda, etc. You can also use tea tree oil to remove mould from showers.

2. Spray White Vinegar Solution On Mould

Mix one-part of white vinegar, two-parts of warm water and a few drops of dishwashing liquid into a spray bottle. Apply this solvent over the mouldy area and leave it to activate. Let the solution sit for an hour.

After that, use a scrubbing brush or a sponge to get rid of these bacterial spores. Repeat the process if required and rinse your wall.

You may need a step ladder to reach the ceiling without any inconvenience. Do not forget to dry the wall completely to prevent mould re-growth.

Tip: Read more to know 4 types of cleaning agents to treat stubborn stains and grime from the entire house.

3. Apply Baking Soda to Kill Mould Fungus

Removing mould stains from bathroom tiled ceilings is a tricky task. You need a less acidic cleaning agent for better outcomes. Baking soda or Bicarbonate of soda is a great product to remove mould from porous as well as non-porous surfaces.

It is a natural cleaning agent that can help you kill disease-causing bacteria, germs and fungus. The best part is that baking soda contains no harmful ingredients, and that’s why it is also used by professional bond cleaners Canberra.

To prepare the DIY solution, mix half a teaspoon of baking soda in one cup of warm water.

With the help of a step ladder, you can reach the tiled ceiling and spray the solution. Leave it for a few minutes or until you scrub the ceiling with a soft-bristled brush.

In the final step, rinse and wipe the surface with a clean cloth.

4. Use 3% Hydrogen Peroxide For Better Results

If nothing works, mix one part of 3 per cent hydrogen peroxide and two parts of warm water into a spray bottle. You can also add baking soda and dishwashing liquid to prepare an effective mould remover. Hydrogen peroxide is a great alternative to chlorine bleach and ammonia. You can treat stubborn stains from all surfaces and see sparkling results.

It works wonder in killing mould and other germs from almost all surfaces. Let it sit for 10 minutes or until it stops fizzing.

Repeat if required or until the visible stain is gone. Make sure you rinse, wipe and dry the ceiling to keep mould at bay.

If you are prepping your rental property before the end of your tenancy, book the best bond cleaning Canberra service and secure your bond money. Property managers inspect the rental property and cover all nooks and crannies. So let professionals do the complicated task without a hint of stress.

How to Prevent Mould Infestation on Ceilings?

Removing mould from ceilings is not enough to maintain a healthy and hygienic indoor environment. It is imperative to prevent mould from coming back. You should focus on keeping your ceilings away from mould infestation. So, keep these tips in mind for desired outcomes:

  • Make sure your roof is not leaking. If there is water damage, fix it as quickly as possible. You can also focus on water-efficiency to reduce waste and save money.
  • Ensure your home is properly ventilated. So, open your doors and windows for cross ventilation
  • Install a dehumidifier if the humidity level is high.
  • Leave the shower glass door and bathroom door open when not in use
  • Run the extractor fan when bathing
  • Allow the natural light come inside your home.
  • Keep your entire house clean and disinfected.
  • Book the best pest control service in Canberra before the rental inspection of your leased apartment.

Wrapping Up

Use these simple tips to remove mould from your ceilings, both painted and tiled. It is good to use a ceiling paint for moist areas like bathroom and kitchen. You can also book professionals to remove mould and mildew using effective methods.