How To Clean Your Hot Tub Without Chemicals

How To Clean Your Hot Tub Without Chemicals

By : Angelina
There is hardly anything more pleasing than soaking in a hot tub at the end of a long and tough day. However, you will only do that if the hot tub is clean and well-maintained. In contrast to popular opinion, cleaning a hot tub is not as simple as just wiping it off with cleaners. It involves removing build-up, balancing the water, and adequately treating the spa surface while also maintaining the equipment’s life.

Moreover, you do not need to use chemicals, as there are plenty of effective DIY cleaning solutions for this purpose. This is why professionals prefer using them for the best end of lease cleaning Canberra. Here is how to clean your hot tub without harsh chemicals. Follow all these steps to keep your hot tub clean and hygienic.

1. Flush the Hot Tub Lines

Initiate the process by flushing out the build-up and dirt that are likely to be trapped in the tub’s plumbing. It helps eliminate scale, biofilm, and other contaminants that might have accumulated within the plumbing system over a period of time. Such build-up will shelter bacteria and significantly decrease the hot tub’s overall efficiency.

Flushing the lines using a particular line flush cleaner before proceeding with draining and cleaning guarantees that the tub’s internal components stay in ideal condition. It will offer you a safer and more delightful experience. It is best to avoid using any chemical product. A better alternative would be a DIY solution. Here is the procedure to follow:

  • Mix equal parts vinegar and baking soda in a bucket.
  • Add the solution directly to the tub’s water.
  • Turn the jets on high and allow the cleaner to circulate for about 30 minutes.
  • 2. Drain the Tub

    It is crucial to turn the tub’s power off to prevent causing any sort of damage. Carefully unplug and power it off at the circuit breaker. Now, you can drain the water easily. There are plenty of methods for draining, so it is best to check the manufacturer’s guidelines. Making use of a garden hose connected directly to the drain valve will clear it. However, be aware this might take around an hour or two. There is another method where you can use a submersible pump. Here is the simple procedure to follow:

  • Plug in the pump
  • Connect its drainage hose
  • Place it in the tub’s deepest part and switch it on
  • If it is not designed to switch off automatically, you will need to keep an eye on the progress. This way, you will be able to switch it off once it has drained the water. According to expert bond cleaners Canberra, both these methods are appropriate for draining your hot tub.

    3. Thoroughly Clean the Hot Tub

    After draining, your hot tub will be ready for the cleaning procedure. Again, avoiding commercial cleaning products is a must to ensure an effective and eco-friendly cleaning. A simple solution prepared using 1 cup of cold water and 1 cup of white vinegar in a spray bottle will work wonders. Do not forget to wear protective gloves. Spray the cleaner on all the surfaces. Let it sit there for around 15 minutes.

    Follow up with using a soft cloth. Pay extra attention to the area around the water line. Ensure you are wiping away hard water build-up and grime. Afterwards, rinse thoroughly and wipe down the tub using a towel. This is how professional end of lease cleaners Canberra prefer cleaning the hot tub.

    4. Clean the Filter Properly

    A dirty filter has the ability to restrict the water flow, making your tub’s circulation system work harder than needed, leading to increased energy consumption. Moreover, clogged filter will not be able to effectively capture contaminants, decreasing the water clarity and making way for possible health risks.

    It is best to clean the filter around every four weeks. For this, simply rinse it using a garden hose. Next, soak it in the previously used vinegar and water mixture in a bucket. Finally, rinse and dry it before placing it back.

    5. Refill the Tub

    After you have completely cleaned the hot tub and its filter using the right tools, it is time to refill the tub by following the manufacturer’s instructions. Next, you can power it up so that you can enjoy the benefits provided by the hot tub. Treat the water with the needed combination and check the recommended levels by consulting the manual before starting to use the tub.

    6. Tips for Maintaining Cleanliness for Longer

    While following these steps will certainly make your hot tub clean, it won’t be enough if you fail to stick to a regular cleaning routine. Professionals who perform cheap bond cleaning Canberra recommend doing these things to keep your hot tub clean for an extended period:

  • Follow a basic weekly cleaning routine and deep clean your hot tub every three to four months.
  • Use eco-friendly cleaning solutions and avoid chemicals.
  • Thoroughly clean the filter once a month and replace it once each year.
  • When not in use, ensure your hot tub is covered appropriately.
  • Once a year, contact a professional to inspect the tub.
  • Wrapping Up

    Maintaining a clean hot tub is not difficult if you use the right cleaning solutions and stick to a cleaning schedule. By following the steps from this article, you will be able to successfully clean your hot tub.