How to Clean Upholstery with Steam Cleaner?

a man in blue t-shirt holding a steamer

How to Clean Upholstery with Steam Cleaner?

By : Angelina

Steam cleaners are excellent cleaning equipment that can save you a lot of time and energy while removing dust and grime from upholstery or fabric furniture. The vapour produced by the steam cleaner not only pull out embedded dust, grease and stains but also sanitises the surface by removing allergens and killing disease-causing bacteria.

The high-temperature steam also works wonders in breaking down and dissolving dirt from the delicate upholstery without even using harsh chemicals. By following the right techniques, you can also steam clean your fabric furniture yourself.

In case, you are moving out of your rental house and want professional service, then recommend hiring experts for a meticulous end of lease cleaning in Canberra. Professional cleaners know the best ways to remove stains, dust particles, build-up grease and allergens from different surfaces.

You can take assistance from them for the sake of your bond money. But if you are planning to clean your upholstery on your own, then this article is for you. We have covered the complete process of cleaning the fabric furniture using a steam cleaner to make your work easier.

Let’s get started!

1. Vacuum the Upholstery

Before using the steam cleaner, prepare your upholstery by removing loose dirt and grime. For this, vacuum the fabric furniture thoroughly using the brush attachment. Get into every crack and crevice to get rid of pet hairs, dander, dust, allergens and pollens.

If the furniture has pillows, remove them and clean using your vacuum cleaner. Attach the crevice nozzle to remove dirt particles from gaps at sides. Don’t forget to vacuum the back of the upholstery.

2. Treat the Stains

If there are any tough stains on the upholstery, you can treat them using either homemade all-purpose cleaner or commercial upholstery cleaner.

Apply it on the affected area and leave it for 5-10 minutes so it can loosen the stain. After that, blot the surface using a soft microfiber cloth- this will remove the stain easily.

Tip: This is an optional step. If you want to treat stains from steam cleaner, then you can skip this step. Many professional cleaners in Canberra pre-treat the stains before using the steamer because it gives sparkling results.

3. Prepare your Steam Cleaner

Start by removing the boiler cap of your steam cleaner. Fill water in the boiler and replace the cap. After that, attach the hose which has the steam gun and don’t forget to activate the safety lock. Now plug the cleaner into the socket and let the steam cleaner heat up.

Follow the instructions carefully for better outcomes. Be sure you don’t fill the boiler with too much water as it could be released on your fabrics, which will over saturate the stains. Also, use the right attachment for upholstery- it can be a revolving brush or a stationary brush.

Tip: Try to avoid using too much soap into the water. Instead, use only the required amount of soap for steam cleaning.

4. Clean the Cushions First

If your upholstery has removable pillows, then start cleaning them first. Grab the handle of the steam cleaner or the attachment and spray the surface with the steam. Press the button that releases the steam onto the surface.

Gently wipe your cushions with the brush attached to the steam cleaner and reactivate the safety lock. The entire process will wet the fabric when the steam hits it. After that, drag the opening of the steamer over the damp area to evaporate the excess water. This will also remove the dust, dirt and tough stains from the surface of the fabric.

Tip: Don’t forget to steam clean the sides of the pillow for thorough cleaning.

5. Steam Clean the Rest of the Upholstery

Clean the entire fabric furniture the same way as you did on the cushions. Target a small section at a time to remove grime and dust. After selecting the steam pressure for upholstery, release the steam and wipe a smaller section of your fabric furniture with the attached brush to the cleaning tool.

Wait for 20 minutes and check the surface you cleaned. If you are happy with the results, you can clean the rest of your sofa using the same procedure.

Tip: You can also take professional help from trained cleaners in Canberra, who can make your upholstery cleaning job easy, especially if you are under a serious time crunch. And also they prefer using toxic-free cleaners than chemical based products with hazardous chemicals.

6. Let the Fabric Furniture Dry

Once you have cleaned all the upholstery, leave it to dry completely. The amount of time may vary based on how humid the steam cleaning was and also the weather on that day. You can use a fan or open a window to speed up the drying process.

Tip: If there is any discolouration after the steam clean, you may need to repeat the process.

7. Vacuum it Again

When the upholstery is completely dry, vacuum it again. This will help you remove dirt and grime loosened by the steam cleaner but not picked up by the attached brush or a microfiber cloth.


Steam cleaning fabric furniture at home has become super-easy with these tips mentioned above in the article. You can follow all these steps carefully and bring back the lost shine of your upholstery without using any toxic products.

For those who are moving out of their rental premises can hire professionals for the best end of lease cleaning in Canberra. With the right tools and techniques, they will clean up the entire property and help you get back your full bond money.