Helpful Tips for Cleaning Ceramic Tile Floors

Ceramic tile usually requires a lot of extra efforts and attention to prevent moisture and staining damage. Thus, cleaning them and maintaining them, especially the high-traffic areas, can be a challenging task. And if you are at the end of your lease cleaning these beautiful tiles becomes all the more important.

There are numerous ways to reduce the amount of labour involved in maintaining the cleanliness of such tile floors. However, hiring a reputed end of lease cleaning company in Canberra is an excellent option as they have the proper equipment and aware of the latest cleaning methods.

However, there are also some DIY methods for people looking for budget cleaning. It will keep your ceramic tile floors neat and clean for a quite extended period. If you want to take better care of the ceramic tile floors and looking for some preventative methods that can minimise the future work, you are at the right place.

By following these strategies, you are most likely to enjoy a long-lasting and attractive ceramic tile floor. Let’s have a look:

Basic Cleaning of Ceramic Tile Floors

People usually opt for Ceramic tile flooring owing to its resistant to dirt and low maintenance. However, like any other floor, it can also get a little dull over time. But you can get that shine back by using the following tools.

• Vacuum or Broom/dustpan
• Mop
• Mild dish soap or Detergent
• Water
• Baking soda
• Microfiber towel
• Bucket
• Lemon juice (optional)

Cleaning Process

First, you need to use the vacuum or broom and dustpan to remove as much dirt and debris as possible from the floor. Then, use warm water to fill the bucket. Add appropriate amount of dish soap or a natural cleaning product.

Try to use a small amount of soap as your main intention is to remove the scum or grease on the floor. Now, dip the mop in the bucket and mop the floor. There is no point in getting the floor too wet, only try to remove the dirt. At last, you can use the microfiber towel to dry the floor and avoid streaks and water spots.

Removing Stubborn Stains From Ceramic Tile Floors

People often struggle with stubborn stains on their ceramic tile floors. If you are also facing the same scenario, you might need to follow a different cleaning method. For that, you will require:

• Water
• Baking soda
• Microfiber towel

Cleaning Process

First of all, make a fine thick paste by mixing the baking soda and water. Then, spot the area that has stubborn stains and apply the paste there. Allow it to sit for a couple of minutes so that it can absorb the stain. After that, use a microfiber towel to scrub the tiles gently to make sure that stains have to remove completely.

Now, you need to rinse the area with water thoroughly. You must clean the area properly; otherwise, baking soda can leave a mark. Use a dry towel, to remove the excess moisture from the area. If you are also wish to make an effort towards protecting the environment, this is the most effective and natural way to remove stains.

People also opt of bond cleaning professionals in Canberra to remove stubborn stains as they have experience and modern cleaning tools. But with a little knowledge, you can also clean it yourself.

Most Appropriate Mops for Ceramic Tile Floors

• When you are mopping ceramic tile floor, a rag, spin, or chamois mop is consider as the best ones. These mops work superbly to keep dirt from appearing into the grout.
• If possible, avoid using a sponge mop because it is most likely to leave the dirt behind and thus it will give the floor a dull appearance.
• Rubber mops are also not a great option for ceramic tile floors as they leave behind dirt in the grout. A towel is an excellent option as it works well to clean the ceramic tile.
• However, it is not that good for the floors as it needs scrubbing the hands and knees. That is why, a rag mop works best on the floor as it works the same as a towel, but protects the knees. When you are cleaning the ceramic tile floor in a shower, a towel is the best option.

Other Helpful Tips

• While cleaning, you should change the water often. It will avoid smudges and streaks from dirty water being added back to the ceramic tile floor.
• To keep it clean, only use water to mop the floor from time to time. If there are any stubborn stains, use baking soda to remove that.
• It is advisable to contact bond cleaning company in Canberra as they have adequate knowledge, experience, and cleaning equipment.
• When cleaning a ceramic floor, stay away from the oily cleaners. They make the floor super-slick and leave behind a residue that is difficult to remove.

Endnote

If you are looking for a budget cleaning of your ceramic tile floor, the ways mentioned above can be beneficial. Proper ingredients in an appropriate amount and correct cleaning procedure are the real secrets behind the cleaning of this fantastic floor.