End Of Lease Cleaning: 10 Common Mistakes To Avoid

End Of Lease Cleaning: 10 Common Mistakes To Avoid

By : Angelina

Losing the rental bond is one of the biggest fears of renters in Canberra. Therefore, end of lease cleaning is an important task you must perform adequately to leave the rental property in the same condition it was in at the start of tenancy.

When you do it well, you can relax during the final inspection and claim your security deposit which is up to four weeks of rent and a substantial amount. Since many people don’t know what landlords expect from bond cleans or don’t have the time, energy or motivation to do it themselves, they hire professionals for end of lease cleaning in Canberra. Thus, you can do the same.

However, if you are confident and can manage bond cleaning yourself, listed below are ten common end of lease cleaning mistakes to avoid. Have a look.

1. Not Referring to the Original Condition Report & Documenting the Current Condition

Before you start end of lease cleaning, you must review the original condition report to know which areas are dirtier than they were. This step will help you clean and return the property in a reasonably clean condition. In addition to checking the entry report, you must take photographs and videos to document the current state of the property after cleaning for the exit condition report.

2. Never Do It Without A Plan Or A Checklist

End of lease cleaning differs from regular house cleaning because it requires a lot more effort, time and expertise. Therefore, you can backtrack a lot when you don’t have a plan and a checklist. Professional end of lease cleaners in Canberra use checklists to streamline their tasks and sort them according to importance. To do the same, you can download a pre-made checklist online and customise it as required.

3. Overlooking Repairs Before Cleaning

If you have damaged surfaces and fixtures in your rental property that were affected due to your negligence, their repairs are your responsibility. You must talk about the repair work with your landlord first. Once the repair work is outlined, hire the right professionals for the job or ascertain which repairs you can do yourself to get your bond back without dispute.

4. Disinfecting without Cleaning Surfaces

One of the most commonly made mistake by renters while sanitising their property is not cleaning before disinfecting. It is vital to understand cleaning and disinfecting are two different activities and should be performed in the correct order to get the best results. Disinfecting a surface without cleaning is ineffective in killing the germs on it, as the pollutants shield the microbes on the surface.

5. Not Using the Right Amount of Product

Sometimes a cloudy film of residue is left on surfaces or objects after cleaning. Ever wondered why that happens? It is excessive product application and inadequate removal. Often people think the more product is used, the better will be the result, but this assumption is wrong. End of lease cleaning experts in Canberra always use the required amount while cleaning and sanitising surfaces and objects.

Thus, if you want to prevent wastage of cleaners, avoid damage to household items/areas, and get optimum results, please use the right amount of cleaning products.

6. Cleaning Without Using the Right Techniques

How many times have you re-contaminated surfaces while cleaning and wasted your time? If it happens often, then you need to change your technique. You have to use the right cleaning technique like end of lease cleaning experts in Canberra. Always clean top to bottom because as you clean the gravity will cause the pollutants to fall downwards and prevent the re-contamination of cleaned surfaces. In addition, while cleaning a room, move in a circular pattern from left to right to save time and sanitise every area without going over it twice.

7. Using Cleaning Tools Without Washing & Disinfecting Them

Bacteria, viruses, fungi, and other pathogens are found in large quantities on cleaning tools. Additionally, they accumulate dust, dirt, and grime. These germs and pollutants are spread on surfaces in your house while sanitation if these tools are not cleaned before usage. Cleaning tools are useful when they are free of illness-causing microbes and contaminants. Thus, make sure to clean them after each use and disinfect them for adequate sanitation of cleaning equipment.

8. Overlook Cleaning Door/Window Tracks and Frames

The tracks and frames of windows and doors are often neglected while cleaning household areas and fixtures. However, sanitising these areas is necessary as dust, dirt, debris, and a host of pollutants accumulate there. These contaminants can reduce the quality of indoor air as pollutants can enter the atmosphere of your house. You can vacuum the tracks and frames effectively and efficiently by using the crevice tools.

9. Not Taking Professional Help For Carpet Cleaning

Carpets are tricky to clean when you don’t have the right equipment or expertise to sanitise them. Therefore, you can lose your bond because carpets stains are notorious and re-appear a day or two after cleaning. What’s more, discolouration or matting of fibres is common when the wrong products and techniques are used. Thus, it is better to hire professionals for carpet cleaning even if you are performing DIY end of lease cleaning in Canberra.

10. Leaving Tasks Until The Last Minute

Getting lax during end of lease cleaning is common due to tiredness. However, leaving cleaning chores util the last minutes makes you complete them in a hurry and make mistakes. These mistakes can be costly which is why make sure to do all the task in time to vacate the rental property successfully.

Wrapping Up

To sanitise your rental property adequately and efficiently, it is essential to clean and disinfect it correctly. Thus, use this guide to avoid making end of lease cleaning mistakes you’d never know you are making. Apply the products adequately, give them time to work, and follow other insights shared above to get optimum results and prevent damage of household surfaces and fixtures.