If you leave them untreated, they can take an ugly shape and convert into allergies and various respiratory problems. The worst part is that mould can damage your carpets, wooden furniture, hard surfaces and even tiles.
That’s why it is important to check every nook and cranny of your house, especially where the humid level is high and treat them as quickly as possible.
However, removing moulds is a complicated process, and you need proper tools and products. That’s the reason why most people consider hiring trained experts for a high-quality end of lease cleaning in Canberra. They will inspect the entire property and use only eco-friendly products to give you the best possible results.
If you want to treat on your own, then consider the following tips by professionals:
1. Inspect Your House Thoroughly
As mentioned above, mould and mildew thrive on moisture and humid areas, so keep a check on the following places:
- Bathroom walls
- Area under the shower
- Kitchen sink
- Nearby water pipes or pipelines
- Fix the water leakage issue.
- Carpets and rugs
These are the places where black spores are expected to produce and harbour. But, do not forget to check the other areas of your house.
2. Everyday Cleaning is Important
According to cleaning experts, it is good to treat mould and mildew as soon as possible. If you see black spores on the surface, then immediately get rid of with a little bit of effort. All you need is mild detergent soap and warm water.
You can apply this soapy water and scrub off the surface using a brush. Spray and wipe the mouldy area using a clean cloth.
Make sure you hunt the spores and treat the moisture issues that foster mildew growth. Keep the windows open after you shower, dry the skins after washing dishes and ensure proper ventilation if you don’t want to see this nasty stain again in your home.
3. Search for Outside Leaks
If you encounter mould on an exterior ceiling and wall, then look for a leak in the roof or the wall. It is good to measure from the area where you see a mould to a reference point such as a door and find the spot on the side of the ceiling or wall.
This is a tricky part, but inspect nearby roof flashing, windows and decks to look for dampness. In such a situation, you need to hire a professional handyman in Canberra to fix the outside leaks as quickly as possible.
4. Mould Vs Dirt
Sometimes largely hidden layer of growths just make a surface look filthy and dirty. It is good to know the difference between the dirt and mould before applying any expensive product.
Professionals recommend you to do a quick test for mould by dipping a swab in diluted bleach. Dab the cloth on the affected area. If the spot lightens quickly or keep coming back after cleaning, then it is a mould.
Tip: You can also buy fancy mould test kits available in the market to detect the type of mould in your home.
5. Apply an Antimicrobial Spray
After drying up the moisture, make sure you clean and spray the spot using an antimicrobial treatment. This will prevent the re-growth of mould and mildew. If you witness a musty smell in your basement, then spray the product in the entire room. This is one of the most effective products used by professionals to eliminate moulds and mildew growth.
6. Use White Vinegar to Treat Black Spores
White vinegar is an acidic product that is used as a natural cleaning ingredient to remove tough stains, remove bad odours and lethal germs. It can also kill different types of mould and mildew from porous as well as non-porous surfaces. If you find out mould stains in your home, use this chemical-free product.
All you need to do is to pour white vinegar into a spray bottle and apply it onto the mouldy surfaces and leave it for half an hour.
Wipe it off using a damp cloth and let the surface dry completely. The smell of vinegar will also go away in a few hours.
7. Treat Mould with Hydrogen Peroxide
Hydrogen peroxide is an antiviral, antifungal, and anti-bacterial product found in most medicines. It can disinfect the surfaces and treat moulds in a safe and sound manner. You can use on surfaces like counters, kitchen appliances, tubs, bathroom fixtures, hard flooring, etc.
You can pour 3 per cent concentration of hydrogen peroxide into a spray bottle. Make sure you test it first before applying it on the mouldy surface. This will prevent your surface from discolouration. Apply it on the surface and leave it for 10 minutes.
After, scrub the surface using a brush and rinse with clean water. Do not forget to wipe dry.
8. Baking Soda Works Wonder
You can use baking soda to get rid of mould and mildew from different surfaces around your home. Add one-quarter tablespoon of baking soda and water to make a thick paste. Apply it to the affected area and scrub it using a brush. Spray the surface with water and wipe it off with clean water. Dry the surface completely.
If you are suspicious about some serious black spores in your bathroom and kitchen, then treat them as quickly as possible. Hopefully, the tips mentioned abode by professionals will help you remove mould and mildew with ease. If you are at the end of your lease, then hire professionals for a detailed end of lease cleaning in Canberra and get your bond money back.