If you are planning to move out of your lease property, then end of tenancy cleaning is essential. Without proper cleaning, you can lose you bond money entirely or partially.
Before you start the cleaning work, ensure everything is out of the apartment. This will be fruitful as you will be able to inspect every nook and corner and won’t miss out on anything that requires attention.
Always remember, it is the responsibility of residents to maintain the cleanliness throughout their tenancy and return the premise in the same condition, as mentioned in the agreement. It is good to check the initial condition report twice before repairing or cleaning any specific thing. You are obligated to fix the problem caused by you during your lease period. So, be careful and know your
laws and rights as a tenant in ACT.
Here is a complete guide to help you carry out a detailed end of lease cleaning for the smooth retrieval of bond money after the thorough inspection.
Move-In Inspection
The first thing you need to do when you first move into a rental property is a proper inspection. This inspection will help you in determining the areas that are unclean or already damaged.
Then properly maintain the data in the property condition report. This report will be beneficial as a reference; that it was a pre-existing issue. Under these circumstances, you will not be liable for any compensation to the landlord or loss of your bond money.
Start with a Checklist
Property owners have the right to get back their property in good condition. While moving out, make sure that everything is in proper condition as in the absence of this, you are liable to lose your bond money.
During the inspection, the agent will go through the report to know the exact condition of the property. You can use this as a guide to come up with your own checklist and work on those areas that require repair or cleaning work.
The list you use at the
End of Lease Cleaning Canberra should be made as per the professional Checklist.
Window Cleaning
It is strongly believed that a clean sparkling window adds to the overall ambiance of the interior. While leaving the rental property ensure to clean all smudge marks on the windows. For the apt cleaning usage of cleaning solution and microfiber cloths are very fruitful. You can
remove lime from windows and other surfaces using vinegar solution.
End of Lease Cleaning Canberra is trained to do a thorough cleaning service for the rented property. This end of lease cleaning service will ensure that tenants retrieve the entire bond money.
Carpets Cleaning
What is your plan? If your carpet has become dirty and required extensive cleaning. Clean it before you leave the rented property. You can give a carpet a refreshed look by the steam clean. The steam clean will prevent long-term damages. However, most bond cleaning companies won’t include steam cleaning in the end of lease cleaning package. They will only vacuum your rugs and delicate floor coverings. If you want your carpets to look sparkling clean, additional service will be required.
In some case, your agent will look for a receipt for professional carpet steam cleaning. So, you have to keep all the document ready for the final inspection.
Walls Cleaning
As you know different types of wall finishes require different care. So while cleaning, you must use special cleaning procedures to clean hidden dirt out of the textured finish. This cleaning will enhance the overall interior of the property.
If there are some stains on the wall, you can wash it with sugar soap and warm water. This cleaning will help you in attaining your bond money back.
Cleaning of Light Fixtures and Fittings
It’s a fact that nobody does the job better than the end of lease cleaners. The other important area of cleaning at the end of the lease is cleaning of light fixtures and fittings.
Light bulbs, fans, ceiling and light switches should be adequately cleaned and are in good working condition. Agents will look at all the parameters of cleaning; hence the entire area should be scrubbed and cleaned correctly. If electrical fittings are malfunctioning, you should fix it.
Use a microfiber cloth and wipe down light fixtures and fittings. It is one of the best dusting tools that can be used again and again without causing harm to the surface as well as the environment.
Clean the Exterior
If your property comprises of an outdoor area or a yard, ensure the premise is free from all kinds of prune plants and weeds. The oil and grease stains are very hard to come off so use pressure washer to clean the outer area of your lease property. A pressure washer will make your cleaning task a lot easier. If your exterior is dirty, the agent will doubt the internal hygiene also, so clean it with utmost precision.
Bathroom Cleaning
Bathroom cleaning is an arduous task, thoroughly clean it and disinfects the entire bathing area. Scrub it properly to remove all signs of soap scum and mould. Make sure you use green cleaning products while cleaning your bathroom to prevent the spread of toxic chemicals.
Tip: It is always good to start from the ceiling to fetch dust and dirt. This will make your job a lot easier.
You can also use a paste of baking soda and vinegar for cleaning.
Before cleaning task walk through the leased property and make a note of cleaning solutions required for the cleaning.
Conclusion
These are some of the great end of lease cleaning tips that will help you get the full bond back without any dispute. Make sure you use eco-friendly cleaning products to
minimise the carbon footprints on the environment and hire a company that can give you green end of lease cleaning in Canberra.
