The end of tenancy or lease is one of the crucial periods when tenants have the responsibility to return the property to its original condition. According to the
residential tenancy laws in ACT, landlords or property managers has the right to withhold the deposited security if a rental property is in a dirty state.
Tenants or renters are obligated to do necessary repairs if they damage anything during the lease period and deep clean the property. This has to be completed before the final inspection by the landlord. Cleaning may not b tough, but mistakes happen, and there is no room for blunders when moving out of a rental apartment or home.
The best thing you can do is to hire professionals for a
cheap end of lease cleaning Canberra. They strive to give you quality results without making silly mistakes. All areas, from ceilings to floors, will be covered to help you pass the rental inspection.
Here are 10 common end of lease cleaning mistakes tenants commit and lose their bond money. Make sure you avoid these blunders and impress your landlord.
1. Not Preparing a Cleaning Checklist
Many people forget to create a cleaning checklist due to their busy schedules. You can’t afford this blunder if moving out of a rental property. Preparing a customised checklist will help you cover every nook and cranny and streamline the entire process.
Professionally-trained end of lease cleaners in Canberra work according to the pre-approved checklist to give the best possible outcomes.
2. Not Arranging Cleaning Supplies
Removing stains from hard surfaces to vacuuming carpets, every single task requires a proper cleaning tool and, of course, products. You can’t achieve desired results on time if you are not equipped with the necessary supplies. This could turn into a nightmare at the end of your tenancy.
So, creating a complete list of supplies you need and arranging it before getting into the process is good. Make sure you arrange dusting mops, microfiber cloths, dusters, a vacuum cleaner, broom, dustpan, a squeegee, stain removal, grease removal, disinfectant, etc.
3. Cleaning Before Repairing
Avoid this mistake if you are concerned about your bond money. First, fix the damages, such as leaking taps, broken windows, glasses, etc., before cleaning. This will save you a lot of time and achieve an organised system.
You can hire a professional handyman in Canberra to fix all the issues within the premises before your final move out.
4. Ignoring Air Ducts & Filters
Most people often forget to clean the air filters and ducts. Before handing over your bond money, the landlord thoroughly inspects the property, including air ducts. If you don’t want any conflict, vacuum the air filters using a vacuum cleaner. Make sure you do this before cleaning your windows and floors.
If possible, change the filters. This will prevent the indoor air from getting polluted.
5. Overlooking Kitchen Appliances
Do not ignore your microwave, oven, fridge and dishwasher while cleaning your kitchen. The dirt or built-up grease inside these appliances can cause a rift between you and the landlord.
So, it is good to grab a clean cloth, white vinegar and warm water solution and treat stubborn stains, spills, stuck food particles, grease and grime. You can use natural cleaning products to
clean fridge like a pro.
You can also hire professionals for a detailed end of lease cleaning Canberra and secure your hard-earned bond money.
6. Soaking Upholstery in Hot Water
This is a serious mistake people make when preparing their rental properties. Of course, removing coffee spills, splatters and grime from an upholstered couch are tough, but you can’t soak it in water. This could make the spot bigger and also ruin the fibre. Instead, blot the damp cloth on the affected area and transfer the stain from the sofa to a damp cloth.
You can also read the instructions written on the product to achieve desired results.
7. Scrubbing Carpet Stains
Do you want to ruin your carpets while removing stubborn stains? Scrubbing can damage the fibres of your carpet. So, if you see stains, wet them with white vinegar and soapy warm water solution. Leave it for a few minutes and blot the surface with a damp cloth. Do it with gentle hands.
Sprinkle a generous amount of baking soda and leave it overnight. Vacuum the surface to get rid of unpleasant odours.
8. Leaving Window Streaks Behind
If you are washing windows but still witness streaks behind, you must be making a serious mistake. It is good to wash your windows on a cloudy day and remove excess soap or water using a squeegee. This will make things easy for you and won’t leave streaks behind.
Tip: You can use borax to
remove lime from windows and other surfaces as well.
9. Using Sprays of TV and Other Electronics
Using harsh cleaning agents on electronics such as TVs, computers, laptops, and mobile phones can damage your products. Do not use a paper towel to clean them.
Instead, use a microfiber cloth and white vinegar solution. Damp the cloth and squeeze out an excess solution before wiping the surface.
10. Vacuum Cleaning in the Wrong Direction
Vacuuming in one direction won’t remove embedded dust from your carpets. This will fix the dirt deep inside your floor coverings.
It is good to vacuum forward and backward. This way, you can easily reach the fibres and fetch accumulated dust, pollen, allergens and grime.
Conclusion
These are the most common end of lease cleaning mistakes tenants commit and lose their bond money. If you want to keep your hard-earned money safe, hire our professionals for a thorough end of lease cleaning Canberra and pass the rental inspection. They can also bring green cleaning products to protect the environment by keeping harmful chemicals at bay.
